UNIQUE KIT, FOR BIQUINARY NIXIE TUBES
- Especially for ZM1030, ZM1032 Biquinary Tubes.
- Uses HV518 HV Driver IC, using an odd/ even 1:2 multiplex
- Lots of new visual effects.
- HV518 IC is pre-soldered, so there is no difficult SMD soldering
· Hours, Minutes and Seconds display
· 12 or 24 hour modes
· Uses a Quartz Crystal Oscillator as the timebase
· Programmable leading zero blanking
· Date display in either DD.MM.YY , MM.DD.YY or YY.MM.DD format
· Programmable date display each minute
· Scrolling display of date or standard display
· Alarm, with programmable snooze period
· Optional DCF / MSF / GPS synchronisation with status indicator LED
· Dedicated DST button to switch between DST and standard time
· Supercapacitor backup. Keeps time during short power outages
· Simple time setting using two buttons
· Programmable leading zero blanking
· Five programmable neon colon settings (Flashing AM/PM indication, illuminated AM/PM indication, both flashing, both on, both off)
· Seconds can be reset to zero to precisely the set time
· Programmable night mode - blanked or dimmed display to save tubes or prevent sleep disturbance
· Rear Indicator LEDs dim at night to prevent sleep disturbance
· Weekday aware ‘Master Blank’ function to turn off HV/ tubes on weekends or during working hours
· Separate modes for colon neons during night mode
· Standard, fading, or fading + scrollback display modes
· ‘Slot Machine’ cathode poisoning prevention routine
· Programmable LED tube lighting – programmmable by each hour of the day
· Not AC frequency dependent – works in all countries
· All user preferences stored to non-volatile memory
Compatible with the following tubes:
ZM1030
ZM1032
B-5030
NL-5030
NL-1032
NL-1032N
Z870M
Z8700M
Z523M
All electronic components are provided, except wall power supply and tubes
All transistors, resistors, capacitors, ICs, diodes etc.
2 X Neon bulbs for hours:minutes:seconds separators
Double sided, plated - through - hole PCB
Fully pre-programmed PIC microcontroller, with socket
48 X 1mm socket receptacles ('Mouser sockets') for the Nixie Tubes
Download Instructions Here
Compatible with our NEW Micro GPS time synchronisation receiver:
Uses DC power supply (9-12V, minimum 250 mA) This is not supplied - It is more economical for the purchaser to buy locally, suitable for local power outlet type. Full details of the power supply are provided in the comprehensive documentation, and it is very easy to obtain cheaply.
Close view of the 'crown' of the tubes - the strips that connect the odd and even cathodes.
Download Instructions Here
A matching Plexiglass case is available in the 'Cases' section of our store
A matching Plexiglass case is available in the 'Cases' section of our store
A matching Plexiglass case is available in the 'Cases' section of our store
